Cool Gadgets, Gizmos, Games and Geek Stuff on Technabob
VISIT OUR OTHER SITES: THE AWESOMER | 95OCTANE

Like Us on Facebook

Technabob is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
As an Amazon Associate I earn from qualifying purchases. Disclosure.

Adafruit 3D Printed LED Coat Buttons: The Brightest Buttons to Button

 |  |  |  |  |  |  April 10, 2014


Make your clothes stand out with these LED-equipped and 3D printed buttons. Electronics shop Adafruit shared this project last January to help keep folks visible in snowy winter nights, but unless it’s always bright and sunny where you are then you’ll still find a use for these buttons.

3d-printed-glowing-buttons-by-adafruit

Aside from the 3D printed button cases, the main components of this device are the GEMMA electronic board and the Flora NeoPixel RGB LEDs. Watch the video to find out how to put them together.

As always you can find instructions and links to all components on Adafruit’s website. I’m sure you can make the electronics fit in other 3D printed cases, like a replica of Iron Man’s arc reactor.

Image by Noe & Pedro Ruiz

[via Adafruit via Gadgetify]



GlenDronach Cask Strength Batch 10

GlenDronach Cask Strength Batch 10

VamPLIERS Screw Removal Pliers

VamPLIERS Screw Removal Pliers

The Treadwheel Crane

The Treadwheel Crane

The Wagoneer S Is an Electric Jeep that Goes 0-to-60 mph in 3.5 Seconds

The Wagoneer S Is an Electric Jeep that Goes 0-to-60 mph in 3.5 Seconds

The Chrysler ME Four-Twelve Concept Showed the Chrysler That Could Have Been

The Chrysler ME Four-Twelve Concept Showed the Chrysler That Could Have Been

That Time Chevy Made a Batmobile Corvette

That Time Chevy Made a Batmobile Corvette

Advertisement