Cool Gadgets, Gizmos, Games and Geek Stuff on Technabob
VISIT OUR OTHER SITES: THE AWESOMER | 95OCTANE

Like Us on Facebook

Technabob is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
As an Amazon Associate I earn from qualifying purchases. Disclosure.

Fan-made Ultron Mask: There Is No Nose on Me

 |  |  |  |  |  |  |  May 4, 2015


This sweet wearable Ultron mask was made through the combined efforts of Jacob Morin, Michael Ruddy of Hero Complex, and Sean Shaw of Shawshank Cosplay and Props. Jacob made the 3D model, Michael printed the helmet and Sean made the final mask based on the 3D printed one.

ultron_mask_by_hero_complex_props_shawshank_cosplay_and_props_1

Michael used a gMax 1.5XT to print the mask, which took about 83 hours to print. Sean sanded down the 3D printed mask then made silicone molds out of the parts. The finished mask shown in these pictures were casted from those molds.

ultron_mask_by_hero_complex_props_shawshank_cosplay_and_props_2

Sean will be making more masks to sell, but he says he needs to work on the eyes before he starts taking orders. Keep an eye on his Facebook page if you want to buy one from him.

[via gCreate & 3D Print]



CODE41 Anomaly Evolution Watch

CODE41 Anomaly Evolution Watch

ULANZI VL49 RGB Photography Light

ULANZI VL49 RGB Photography Light

Concrete

Concrete

20 Years Down the Road: MINI’s Massive Milestone

20 Years Down the Road: MINI’s Massive Milestone

Will Ford’s Electric Pickup Be Called the F-150 Lightning?

Will Ford’s Electric Pickup Be Called the F-150 Lightning?

Tesla Model Excellence 24K is Hideously Expensive

Tesla Model Excellence 24K is Hideously Expensive

Advertisement