Cool Gadgets, Gizmos, Games and Geek Stuff on Technabob
VISIT OUR OTHER SITES: THE AWESOMER | 95OCTANE

Like Us on Facebook

Technabob is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
As an Amazon Associate I earn from qualifying purchases. Disclosure.

DIY Raspberry Pi LED Matrix Display: PiXels

 |  |  |  |  |  |  |  |  |  December 20, 2015


Need a cheap display for your Raspberry Pi? Or perhaps you’re building a Times Square for ants? Then check out this guide by Adafruit’s Tony Dicola.

raspberry_pi_diy_led_matrix_display_adafruit_1

The project is based around Adafruit’s RGB Matrix HAT for the Raspberry Pi, which makes it easy to power and output to daisy chained LED matrices. Tony says a Pi 2 can handle up to 12 32×32 LED matrices at once. Because of how the image is output, the matrices can be put together only as a rectangle. Further, the display’s aspect ratio needs to be as close as possible to the Pi’s output to reduce distortion. You can also program it so that the matrices show only a portion of the Pi’s output.

Head to Adafruit’s website for the complete guide.



Evolve: Drone FPV Freestyle Flight

Evolve: Drone FPV Freestyle Flight

VAULT V2+ RCT Watch

VAULT V2+ RCT Watch

Animation vs. Arcade Games

Animation vs. Arcade Games

Is a Toyota GR Corolla Coming to the US?

Is a Toyota GR Corolla Coming to the US?

Toyota Reveals GR Supra NHRA Funny Car

Toyota Reveals GR Supra NHRA Funny Car

Ford and GlobalFoundries Partnership Aims to Improve Chip Shortages

Ford and GlobalFoundries Partnership Aims to Improve Chip Shortages

Advertisement